Installation Instructions – Make Suction Cup Stick
RECOMMENDATIONS:
It is imperative that all soap scum be removed from the surface if used in a bathroom and all dirt be removed if used on glass. The surfaces should be squeaky clean! Also, make sure the barrier is on a flat surface when bonding the suction cups to avoid wrinkles.
Select a Barrier size that leaves at least 1/8 inch extending beyond the edge of the suction cup. In other words, use a Barrier that is at least 1/4″ larger in diameter than the suction cup. The larger the Barrier the better.
STICKYSUC INSTALLATION INSTRUCTION IMAGES – EXAMPLE INSTALLATION:
1. Clean Surface – Stickysuc
2. Remove Suction Cups – Stickysuc
3. Open Package – Stickysuc
4. Inspect Contents – Stickysuc
5. Get Proper Barriers – Stickysuc
6. Roughen Surface – Stickysuc
7. Roughen All Barriers – Stickysuc
8. Wipe Clean with Alcohol Pad, Suction Cups then Barriers
9. Open Adhesive – Remove Cap, Flip, Puncture – Stickysuc
10a. Applying Adhesive to Suction Cup – Stickysuc
10b. Applying Adhesive to Barrier – Stickysuc
11. Center Suction Cup and Barrier Then Bond – Stickysuc
12. Install Suction Cup / Barrier – Stickysuc
13. Install the Rest of the Suction Cups – Stickysuc
14. Wipe Mounting Surface with Alcohol Pad – Stickysuc
15. Remove Barrier Backing – Stickysuc
16. Align and Install – Stickysuc
17. Work All Edges Down – Stickysuc
18. Let Cure for 6 Hours – Stickysuc
19. One Less Headache – Stickysuc